Lantronix
SISPM1040-582-LRT CLI Reference
33757 Rev. J
Page
66
of
272
ais-highest
Request the highest possible AIS priority.
lck-prio
LCK injection priority.
level
The MEG level on the client layer.
<0-7>
The MEG level value.
<0-7> Priority in case of tagged OAM. In the MPLS and EVC domain this is the COS-ID.
bin Delay Measurement Binning.
ns Nano Seconds
overflow-reset
Reset all Delay Measurement results on total delay counter overflow.
proprietary
Proprietary Delay Measurement.
synchronized Near end and far end is real time synchronized.
dual
Delay Measurement based on 1DM PDU transmission.
flow
The two way delay is calculated as round trip symmetrical flow delay. The far end
residence time is subtracted.
interval
Interval between PDU transmission in 10ms. Min value is 10.
multi
OAM PDU is transmitted with multicast MAC.
rdtrp
The two way delay is calculated as round trip delay. The far end residence time is not
subtracted.
single
Delay Measurement based on DMM/DMR PDU.
uni
OAM PDU is transmitted with unicast MAC. The MAC is taken from peer MEP MAC
database.
<uint>
Interval value.
last-n
The last N dalays used for average last N calculation. Min value is 10.
<uint>
The last N value.
oui
Organizationally Unique Identified.
<0-0xFFFFFF>
sub-type
Sub-Type
<0-0xFF>
Sub-Type value - one octet.
value
Value
<0-0xFF>
Value value - one octet
Example
:
SISPM1040-582-LRT(config)#
mep 1 cc 3 fr1m
This MEP is not enabled
SISPM1040-582-LRT(config)#
mep 1 cc 3 fr1m
Error: Invalid number of peer's for this configuration
SISPM1040-582-LRT(config)#
mep 1 cc 1 fr1m
SISPM1040-582-LRT(config)#
mep 1 ccm-tlv
SISPM1040-582-LRT(config)#
mep os-tlv oui 02 sub-type 0 value 1
SISPM1040-582-LRT(config)#