Glossary UH50 – FOR INTERNAL USE ONLY!
Gyr GmbH
Glossary UH606-101b
Page
21
of
38
Parameter setting menu
LCD button 1 is used to call the displays of the loop in the defined order. When the last line is
reached, the loop is repeated.
LCD button 2 calls the relevant menu item.
Return to
normal mode
is performed automatically no later than 15 hours later.
Reset
the error message F8 (only if F8 is pending)
Reset
the
maxima
Reset
the
missing time
and the
flowrate measuring time
Entry
of the yearly set days (day and months) *)
Entry
of the monthly set day (day) *)
Entry
of the date (day, month, year)
Entry
of the time (hour, minute, second)
Entry
of the property number, 8-digit numeric
Entry
of the M-bus primary address for module 1 (0..255) *)
Entry
of the M-bus primary address for module 2 (0..255) *)
Selection
of the first module function for module 1 (CE or C2)
Selection
of the second module function for module 2 (CV or CT or RI)
Selection
of the first module function for module 2 (CE or C2)
Selection
of the second module function for module 2 (CV or CT or RI)
Selection
of the maxima measuring period: 7.5-15-30-60 min /
3-6-12-24 h
Return to normal mode
*) It is up to the user to ensure that only meaningful values are entered. No plausibility check is made and
“incorrect” values can be applied (month > 12 etc.)
Note: The functions for modules 1 and 2 are also offered if no or any other module is plugged.
In this way, the heat meter can be parameterized before the modules are fitted.
Action: Effect:
„Resetting“
Pressing LCD button 2 executes the displayed function, then the next line is
displayed
„Entry“
Pressing LCD button 2 causes the first digit to blink; pressing LCD button 2
again increments this value. Pressing LCD button 1 applies this value and
advances to the next digit that can be changed. When the last digit has been
edited, input mode is exited.
Entry can be prematurely terminated by pressing the service button.
„Selection“
Pressing LCD button 2 selects a value from a defined set; pressing LCD
button 1 then applies this value.
After a menu item has been edited, a star symbol (*) briefly appears as acknowledgment.
Permanent return simulation
specifies a constant (simulated) return temperature. Parameter
setting is performed in PappaWin.
P
