LANCIER Monitoring ACS 10000, Руководство по эксплуатации

Страница: 9 / 28

Page 9
1 Housing
2 Holes for wall mounting
3 Threaded hole for cover fixation
4 Motherboard
5 20-72V DC clamp
for power supply connection.
6 Remote clamp
for connection of TX bus.
7 Contact clamp
for connection of a contact sensor.
8 PT 1000 clamp
for connection of an external ambient temperature sensor.
9 PT 1000 clamp
for connection of an external compressor temperature sensor.
10 Pressure clamp
for connection of an external pressure sensor (10 bar).
11 Power line clamp
for connection of a compressor power supply monitor.
12 Compressor (“Comp.”) clamp
for connection of a compressor runtime monitor.
13 Reset button
Holding this button down for 5 seconds resets the operating time counter to
zero.
14 „CAN TX“ jumper
Must be inserted in the TX position.
16 Encoding switches for TX bus address
17 Flow module
19 H1 (contact), H2 (power line), H3 (compressor) LEDs
20 5 V LED
21 10V LED
22 Housing with output air temperature, humidity and air flow sensors
23 Connector for compressed air hose
D Connector/cable for LC display and control panel