lancer 4400 Series, Руководство по эксплуатации

Страница: 22 / 48

IBD 4500/4600/LCD
22
TROUBLE CAUSE REMEDY
4.7 Water in ice bin. A. Coldplate drain is obstructed. A. Remove splash plate to obtain
access to drain tubes and
clear accordingly.
4.8 Water leakage around nozzle. A. Damaged or improperly
installed o-ring on nozzle.
A. If damaged, replace.
If improperly installed, adjust.
4.9 Miscellaneous leakage. A. Gap between parts.
B. Damaged or improperly
installed o-rings.
A. Tighten appropriate retaining
screws.
B. Replace or adjust appropriate
o-rings.
4.10 Noisy/cavitating carbonator
pump.
A. Insufficient incoming water
supply pressure.
A. Verify incoming supply water
pressure to carbonator pump
is a minimum of 25 PSI,
maximum of 50 PSI.
4.11 Insufficient soda flow (car-
bonated drinks).
A. Insufficient CO2 supply pres-
sure.
B. Shutoff on mounting block is
not fully open.
C. Foreign debris in soda flow
control.
D. Defective LFCV module.
A. Verify incoming CO2 pressure
is between 70-75 PSI.
B. Open shutoff fully.
C. Remove soda flow control
from valve and clean out any
foreign material to ensure
smooth spool movement.
D. Replace module.
4.12 Insufficient water flow (plain
water drinks).
A. Insufficient incoming supply
pressure.
B. Shutoff on mounting block not
fully open.
C. Foreign debris in water flow
control.
D. Water filtration problem.
E. Defective LFCV module
A. Verify incoming supply water
pressure to plain water inlet
is a minimum of 75 PSI,
maximum of 125 PSI.
B. Open shutoff fully.
C. Remove water flow control
from valve and clean out any
foreign material to ensure
smooth spool movement.
D. Service water system as
required.
E. Replace module.
CONTINUED ON NEXT PAGE