TITAN
79
EN
cod. 3541Z410 - Rev 01 - 09/2022
1.3 Lighting and shutdown
Boiler lighting
Press the On/Off button (detail 14 - fig. 1).
By pressing contextual button 1 it is possible to choose the desired language and confirm it with the “OK” button.
By pressing contextual button 3 it is possible to interrupt the FH mode.
If neither of the two choices described above is made, continue as follows.
•
For the following 300 seconds the display will show FH which identifies the heating system air venting cycle.
•
The display also shows the firmware version of the cards.
•
Open the gas cock ahead of the boiler.
•
When the message FH disappears, the boiler is ready to operate automatically in case of a room thermostat request.
Settings
Contrast adjustment
To adjust the display contrast, press the
contextual button 2
and the
OK button together
. Then press the button ref.
5 of fig. 1 to increase the contrast or the button ref. 7 of fig. 1 to decrease it.
Date and Time Adjustment
Reach the screen shown in fig. 10, navigating in the
menu and following the path "USER MENU
“Set-
tings”
"Date Setting”. Press navigation buttons 5
and 7 to select the value and modify it with contextual
buttons 1 and 2. Confirm with the OK button.
fig. 10- Date Adjustment
fig. 9- Boiler ignition (X indicates the num-
ber of burners)
X = 2
- TITAN 150
X = 3
- TITAN 225
X = 4
- TITAN 300
X = 5
- TITAN 370
X = 6
- TITAN 450
X = 7
- TITAN 520
X = 8
- TITAN 600
Display v.01
Modules: X
to confirm
Set date
24
/ 09
2013
to select
5
7
1
2
Содержание TITAN 150
Страница 50: ...TITAN 50 IT cod 3541Z410 Rev 01 09 2022 fig 90...
Страница 142: ......
Страница 143: ......
