Laguna Tools Robland X31, Руководство владельца/по сборке

Страница: 25 / 48

COMPONENT LIST
1. Main stop switch (fig. 4)
2. Starting switch (fig. 4)
3. Tool selection switch (fig. 4)
4. Saw tilt crank ( fig. 4)
5. Sliding table rail-locking lever (fig. 4)
6. Saw tilt-locking lever (fig. 4)
7. Combination saw depth adjustment and lock (fig. 4)
8. Planer feed roll disengage lever (fig. 4)
9. Planer thickness-setting locking lever (fig. 4)
10. Planer thickness-setting crank (fig. 4)
11. Jointer knife guard (out of position) (fig. 4)
12. Jointer table-locking lever (fig. 4)
13. Saw rip fence (fig. 4)
14. Rip fence slide-locking lever (fig 4)
15. Rip fence width-locking lever (fig. 4)
16. Mortiser longitudinal movement lever (fig 4)
17. Mortiser infeed movement lever (fig. 4)
18. Jointer fence (fig. 4)
19. Saw guard (fig. 4)
20. Saw blade (fig. 4)
21. Shaper guard housing (fig. 4)
22. Wood clamp (fig. 4)
23. Tenoning plate (fig. 4)
24. Cut-off/miter fence length stop. (Fig. 4)
25. Cut-off/miter fence (fig.4)
26. Sliding table (fig. 4)
27. Shaper work hold-down assembly (fig. 4)
28. Rail support adjusting bolt, outboard (fig. 7)
29. Rail support adjusting bolt, inboard ( fig. 7)
30. Rail assembly (fig. 8)
31. Rail support (fig. 7)
32. Locking block (fig. 7)
33. Locking groove (fig. 8)
34. Hand hole (fig. 6)
35. Clamp post (fig. 8)
36. Cotter key (fig. 8)
37. Large knob-locking screw (fig. 8)
38. Miter pivot bracket (fig. 8)
39. Ball bearing (fig. 9)
40. Mortising mount bolts (fig. 10)
41. Mortiser mounting flange (fig. 11)
42. Mortiser table (fig. 11)
43. Chuck guard (fig. 11)
44. Left/right handle (fig. 11)
45. Depth control (fig. 11)
46. Table height-adjusting crank (fig 11)
47. 90-degree stop assembly (fig. 8)
48. Split knife (fig. 4)
23.