Laguna Tools MSANWB25X60-1K-7.5-0197, Руководство пользователя

Страница: 20 / 62

20
Electronic control panel
The control panel is set on the
front of the machine. It has a
number of switches.
1. Bed up/down buttons.
2. Sanding belt start/stop
buttons.
3. Conveyor start/stop buttons.
4. Emergency stop switch.
5. Power indicator light.
Quick set
The sander has a device on the
side that is used to set the
height of the bed without
measuring the job. Simply put
the job on the height setting
button, press and hold the
arrow up button. The table will
move up until the job hits the
micro switch. The distance between the
sanding head and the job is now set.
Down limit switch
The sander is fitted with a limit switch located
at the back of the machine. This limit switch
limits the down travel of the bed.
Vertical rule
There is a vertical
quick reference rule
that can be used to
check the distance
between the sanding
head and the bed of
the machine.
1
2
3
4
5
Control panel
Quick set
Micro switch
Height setting button
Down limit switch