Laguna Tools MSANWB25X60-1K-7.5-0197, Руководство пользователя

Страница: 12 / 62

12
17. Platen adjuster
The platen can be adjusted lower than the
sanding rollers. The amount below the rollers will
vary depending on the type of sanding being
conducted. If conducting rough sanding, the
platen is adjusted above the sanding rollers so
that it is not in contact with the sanding belt.
18. Sanding belt tensioning knob
The belt tensioning knob controls the amount of
pressure that the piston exerts on the sanding
belt.
19. Sanding belt adjustor
The sanding belt adjustor is used to adjust the
belt centrally on the top roller.
20. Sanding belt oscillation piston
The sanding belt oscillation piston moves a cam
that is attached to the top sanding roller. This
action changes the angle of the top roller and
oscillates the belt along the rollers.
21. Sanding belt tension piston
The piston keeps a constant pressure on the
sanding belt and is retracted to allow the belts to
be changed.
22. Sanding belt
23. Spacer
The spacer is used to clamp the sanding head to
the body of the machine. The spacer is removed
when changing sanding belts.
24. Clamp handle
The clamp handle has a quick-action thread that
requires approximately a half turn to clamp the
sanding head to the body of the machine.
24
23
1
18
22
17
19
20
2