Laguna Tools MSANWB25X60-1K-7.5-0197, Руководство пользователя

Страница: 14 / 62

14
3 . Solid floor. You should select a solid, flat floor, preferably concrete or something
similar.
4 . Locate it close to a power source and dust collection.
5 . Allow an area for the storage of blanks, finished products and tools.
To unpack your sander, you will need tin snips, knife, screwdriver and a wrench.
1 . Using the tin snips, cut the banding that is securing the packing box (if fitted).
WARNING: EXTREME CAUTION MUST BE USED BECAUSE THE BANDING WILL
SPRING AND COULD CAUSE INJURY.
2 . Dismantle the box.
3 . Remove any bolts that
secure the machine to the base
(if fitted).
Note: You may find that the
machine is bolted to the base
through the frame. To access
the bolts, both side panels
have to be removed.
4. Remove the machine from
the base with a forklift truck.
The forklift truck must have
sufficient capacity to achieve
the job safely.
5. Remove the base and lower the machine to the floor.
Note. If you have any doubt about the described procedure, seek professional
assistance. Do not attempt any procedure that you feel is unsafe or that you do not
have the physical capability of achieving.
Shipping bolts (side panel removed)
Unpacking Your Widebelt Sander