Laguna Tools MCNC SS2 4X8 6 HP LIQUID COOLED, Руководство пользователя

Страница: 42 / 51

40
15) Using the drop down menu select tool 8 and input the number 8 in the
green field, Set Tool In Spindle. This will set up the system for touching off
the spoil board cutter to Z zero later in these instructions.
16) Press NEXT to access the second tooling screen.
17) While on this screen, please verify there is a zero in the field for ZSPOIL
so that the tool touch-off value is not adjusted incorrectly.
Select “Tool 8”
Enter “8”