Laguna Tools MCNC SS2 4X8 6 HP LIQUID COOLED, Руководство пользователя

Страница: 25 / 51

25
The Laguna Touch CNC Controller
The Laguna Touch CNC controller was designed to be easy-to-learn and
easy-to operate. There are ten (10) buttons that are carefully spaced (five on
each side of the touch screen) for ease of use. Screen selection on the touch
screen unit are determined by the button selection.
Main Button Descriptions
Alarms ! This is a page jump to the first Alarm Screen.
Tools ! This is a page jump to the first Tool Screen.
Start ! This button is for starting the program shown in the active Program
screen.
Hold ! This button is used to pause a running program. To release Hold,
press the Start button and the program will continue.
Stop ! This button Stops the active program. !
Run ! This button is a page jump to the first Run (Home) screen.
Man ! This button is a page jump to the first Manual screen.
Prog ! This button is a page jump to the first Program screen.
Jog Pos ! This button jogs the selected Axis in the positive direction.
Jog Neg ! This button jogs the selected Axis in the negative direction.