Laguna Tools MCNC SS2 4X8 6 HP LIQUID COOLED, Руководство пользователя

Страница: 15 / 51

15
Compressed Air Connection:
The machine is supplied with an air
regulator. The input air regulator
regulates the air pressure that is
supplied to the machine. The
machine will require an air supply
that can deliver a constant
minimum pressure of 6 bar (85
psi). The input air regulator will
need to be adjusted to 6 bar (85
psi) once the machine has been
connected to the air supply.
No air pipe is supplied, as the
length will depend on the
installation. To adjust the air pressure, pull the cap out (up) and rotate until the
gauge reads the correct pressure. Once the pressure is adjusted, push the
cap in.
It is strongly recommended that 6.5 bar (95 psi) be supplied to the Laguna
SmartShop II and that the regulator then be set to 6 bar (85 psi). This will
ensure that the machine always has the minimum required air pressure. The
input regulator has a moisture trap that must be emptied each day.
It is important that the air that is supplied to the machine is clean and dry. The
machine will not perform consistently if the air is wet or dirty, as any dirt and
moisture will block the valves. Wet, damp or dirty air can damage the machine
and cause inconsistent performance.
The pneumatic system does not need any type of lubricant. Some types of
lubricant can damage the machine and compromise the machine’s functions.
Caution: During maintenance, always disconnect the air supply.