Laguna Tools MCNC SS2 4X8 6 HP LIQUID COOLED, Руководство пользователя

Страница: 40 / 51

38
Getting Started
Preparing for sheet processing, Setting the Zero Point Offset
1) Place a ¾ " or 1" thick MDF spoil board with sealed edges (either edge
band or seal with a rubbing wax), centered on the vacuum table.
2) Insert a small tool (VBit if available) into the spindle manually.
3) Press the MAN membrane switch to access the Manual control screen.
4) Press CONT. JOG button to select continuous jog.
5) Using drop-down menu for JOG SPEED select the speed you’re
comfortable jogging at.
6) Select the Axis you wish to move.
7) Use the JOG POS. and JOG NEG. membrane buttons to jog the spindle
over the front left corner of the spoil board.
8) Press Tool, Membrane switch and press NEXT 3 times until you’re on the
COORDS screen.