Lagrange Pates Creativ 429, Уведомление

Страница: 78 / 88

STARTING AND USE
1
ST
USE
*
When unwrapping your unit, carefully remove all of the packaging
materials and the bags and packaging labels.
*
Make sure that all of the parts and accessories are present and intact.
*
Before using your unit, thoroughly clean all of the parts with soapy
water or water with dishwashing liquid added.
*
Carefully rinse and dry all of the parts.
See upkeep section
MOUNTING OF THE UNIT
Place the unit on a clean, dry and uncluttered work surface.
Completely unwind the cord and make sure that it is not too taught
between the unit and the electrical outlet.
Assemble the unit:
*
Align the extrusion chamber pivoted to 45 ° with the fitting zone
of the unit and turn counterclockwise to connect it. The opening
of the extrusion chamber must be oriented upwards.
dessin N°5
*
Push the extrusion screw into the extrusion chamber.
*
Position the end-piece of your choice, with the arrow pointing
downward
, against the extrusion screw.
*
Maintain the end-piece while screwing on the nut clockwise.
dessin N°6
*
Position the kneading vat and then the kneading blade on the
transmission axis.
dessin N°7
78