Lagler Superhummel, Эксплуатация Обслуживание Безопасность

Страница: 79 / 102

SUPERHUMMEL
01.11.2011
ENGLISH
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7
ATTENTION!
Orient the belt tensioner to the fan pulley (Fig. 64)! The
position A or B of the belt tensioner in Fig. 65 increase the
wearing of pulleys and V-belt extensive!
7 By turning the tensioner, tighten the smaller V-belt (Fig.
66, 1.) and carefully tighten the clamping screw (Fig. 66,
2.).
8 Control the V-belt tension. The slack on the V-belt should
be just under one V-belt width (Fig. 67)
9 Mount the belt guard.
ATTENTION!
• Do not tighten the V-belts excessively, as this can cause
damage to the belts and bearings!
• Check the V-belts tension after a certain run-in period!
Fig. 64 Orient the belt tensioner to the fan pulley.
Fig. 65 Avoid position A and B of the belt tensioner!
Otherwise the wearing of the pulleys and the
V-belt increase extensive!
Fig. 66 By turning the tensioner, tighten the smaller V-
belt (1.) and carefully tighten the clamping screw
(2.).
Similar to figure.
Fig. 67 Belt tension: The slack on the V-belt should be
just under one width of the V-belt.
Similar to figure.
79