Lagler Flip, Эксплуатация Обслуживание Безопасность

Страница: 40 / 60

FLIP
®
01.12.2012
English / Englisch
If you want to sand under low radiators or cupboards, you can
completely remove the wall-protecting roller:
1 Switch off the machine.
2 Pull the power plug out of the socket!
3 Undo the screw in the middle of the wall-protecting roller with
the universal spanner (Fig. 64, 1.) and push the wall-protecting
roller into the front position (Fig. 64, 2.).
4 Undo the two screws attaching the holder of the wall-pro-
tecting roller to the attachment (Fig. 65, 1.) and remove the
complete wall-protecting roller (Fig. 65, 2.).
7.11 REPLACING THE WALL-PROTECTING ROLLER
Use only original LÄGLER ® wall-protecting rollers (part number in
Section 11, Spare parts )!
1 Switch off the machine.
2 Pull the power plug out of the socket!
3 Use the universal spanner to undo the screw in the middle of
the wall-protecting roller (Fig. 64, 1.).
4 Remove the old wall-protecting roller.
5 Insert the bush in the new wall-protecting roller and place it
on the holder of the wall-protecting roller with a washer on
each side. Ensure that the middle of the roller is located over
the nut in the holder (Fig. 66)!
6 Turn the screw through the drill holes in the washer and the
bush into the nut.
7 Adjust the position of the wall-protecting roller according to
your needs ( Section 7.10, Adjusting the wall-protecting
roller ).
Fig. 65 Undo the fixing screws (1.) and remove the com-
plete wall-protecting roller (2.).
Fig. 66 Assembly of the wall-protecting roller. Pay atten-
tion to the nut in the holder!
MAINTENANCE WORK AND REPLACEMENT OF WEARING PARTS
7
Fig. 64 Undo the screw (1.) and push the wall-protecting
roller (2.).
40