Lagler Flip, Эксплуатация Обслуживание Безопасность

Страница: 20 / 60

FLIP
®
01.12.2012
English / Englisch
Fig. 18 Open both quick-release fasteners (1.) and remove
the dust bag (2.).
Fig. 16 Remove the coupler from the Velcro loop on the
dust bag.
Fig. 17 Shake the dust residue from the machine into the
dust bag.
Fig. 20 Pull the waste bag over the fixture. Fig. 19 Insert the waste bag into the emptying fixture.
Proceed as follows to empty the dust bag:
1 Switch off the machine.
2 Pull the power plug out of the socket!
3 Remove the extension cable coupler from the Velcro loop on
the dust bag (Fig. 16).
4 Remove the plug of the motor cable from the extension cable
coupler.
5 Shake the dust residue from the machine into the dust bag
(Fig. 17).
6 Open the quick-release fasteners on the locating flange (Fig.
18, 1.).
7 Slowly pull the dust bag off of the locating flange (Fig. 18, 2.).
8 Hold the handle of the emptying fixture and insert a waste
bag from the ribbed side through the opening in the centre
of the fixture (Fig. 19).
9 Pull the waste bag over the emptying fixture from behind (Fig.
20).
WORKING WITH THE FLIP ®
5
20