LaCinema Classic HD
Introduction
User Manual
page 11
1.5. Views of the LaCinema
Classic HD
1.5.1. Front View
1.
Infrared receiver – Receives the infrared signal from the remote
control. Make sure the receiver is not obstructed.
2.
Disk status LED – Flickering light indicates disk activity.
3.
USB expansion port – Connect a USB flash disk, hard disk or
card reader to access its multimedia files directly from your TV.
1.5.2. Rear View
1.
Power connector – Connect the power supply
2.
10/100 Mbits Ethernet connector – Connect to your home net-
work via an Ethernet cable to your router
3.
USB 2.0 host – Connect a USB Camera, Hard Disk or USB flash
key/drive
4.
USB 2.0 device – Connect to your PC or Mac to copy files to the
LaCinema Classic HD’s internal storage
5.
HDMI – Connect to a High Definition flatscreen TV or video
projector
6.
Video out (yellow) – Connect to any TV (CRT)
7.
Optical audio out – Connect to digital home amplifier
8.
Audio (white and red) – Connect to the audio input of a stan-
dard TV or stereo speakers
Fig. 04
Fig. 05