Lab companion IL3-15 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 56

background image

２

©2016. All Rights Reserved. Jeio Tech Co., Ltd

1.1

How to use the Manual

1.1.1 Introduction

This manual is intended for individuals requiring information about the use of product. Use
this  manual  as  a  guide  and  reference  for  installing,  operating,  and  maintaining  your  Jeio
Tech  product.  The  purpose  is  to  assist  you  in  applying  efficient,  proven  techniques  that
enhance equipment productivity

This manual covers only light corrective maintenance. No installation, service procedure or
other maintenance should be undertaken without first contacting a service technician, nor
should be carried out by someone other than a service technician with specific experience
with laboratory equipment and electricity

1.1.2 Chapter summary

The  safety  chapter  guides  users  to  use  the  product  with  the  best  caution  to  prevent  any
possible accident. Make sure to read the chapter before use.

The Functional Description chapter outlines models covered, standard features, and safety
features.  Additional  sections  within  the  manual  provide  instructions  for  installation,  pre-
operational procedures, operation, preventive maintenance, and corrective maintenance.

The  Installation  chapter  includes  required  data  for  receiving,  unpacking,  inspecting,  and
setup of the unit.

The Operation chapter includes a description of controller features, key name, and product
operation information.

The Maintenance chapter includes a description of product cleaning, moving, storage.

The Troubleshooting chapter serves as a guide for identification of most common problems.
Potential problems are listed, along with possible causes and related solutions.

The accessories chapter includes all the attachable accessories’ information.

The software chapter provides information for installing monitoring program, communication
protocol.

The  Appendix  contains  technical  specifications,  warranty  and  Jeio  Tech  technical  support
contact information.

1.2

Responsibility

This unit has been designed to ensure maximum safety of the user, when used under
normal conditions and in compliance with instructions during operation.

All users are required to run the device according to this manual. The user of the device
should be fully aware of the safety rules marked on the equipment and all the attention •
Warning • Risk on the manual should be complied.

«
...
6
7
8
9
10
...
»

Содержание IL3-15

























































Отзывы:

Нет отзывов

Похожие инструкции для IL3-15

Бренд: Easy@Home Страницы: 28

Бренд: NCR Страницы: 8

Бренд: Waterford Страницы: 16

HOIST-A-TOP JL CRANK

Бренд: Lange Originals Страницы: 13

Бренд: Zircon Страницы: 2

Бренд: Zircon Страницы: 1

Бренд: Kelvion Страницы: 30

Бренд: K&M Страницы: 3

Бренд: M2M Страницы: 20

Instrument Control System

Бренд: Opus-Two Страницы: 8

Бренд: Metric Halo Страницы: 21

Бренд: Insignia Страницы: 2

Бренд: PolyScience Страницы: 14

Бренд: Thermador Страницы: 20

Care@Home MDsense

Бренд: Essence Smartcare Страницы: 12

5TH GEN 4RUNNER

Бренд: Victory 4x4 Страницы: 5

Бренд: Keith Страницы: 2

PROFESSIONAL TRIPOD

Бренд: Zhumell Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды