Lab companion IL3-15, Руководство по эксплуатации

Страница: 41 / 56

３５
Manual NO. 220412L002 Version : 0.0
4.8 Safety
4.8.1 Over Temperature Protection –Electronic temperature limiter
The electronic temperature limiter is basically equipped ( Based on the temperature value of the NTC
temperature sensor ). The limiter will be stopped the switch off, In case of the chamber temperature
become a higher or lower from limiter set value.
The basic usage is as follows.
In main screen: To show current temperature limiter Max. value(H) and Min. value(L).
H : 90
℃
L : -5
℃
In main screen, user can check current temperature by pressing Up/Down key.
Actual PV : XX
Return to In main screen; Stand by 10 sec., or press Config button
If the current temperature value is moving out from limiter setting value (upper value/ lower value), the
indicator lamp will be changed from green to orange color.
After then, the over temperature situation is continually staying over 20 sec; ,
1) The indicator will be changed red color.
2) Display the Protect HIGH.T(High temp.) / LTP(Low temp.)
3) Temperature operating device will be Off which is connect with Temp. limiter.
After check the temperature problem cause and take the solving action. (In case of over the limited
temperature). Press the Config button with Up/Down button together. The display will be return to main
screen
User can change unit and limiter Max. value(H) and Min. value(L). ;
In main screen, Press the Config button about 2sec, the screen will be change parameter setting display.
LOW. T <-> HIGH T. <-> Unit