Lab companion IL3-15 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 56

background image

４

©2016. All Rights Reserved. Jeio Tech Co., Ltd

• When not in use, turn off the power switch or cut off the power to the instrument by
disconnecting the power plug.

1.2.3 Preventative Maintenance

Proper maintenance is essential for safety. The maintenance personnel must be aware
of the importance of safety in maintenance of the equipment for effectiveness of the unit.

Before removing or adjusting parts of the device, shut off all the electrical supply, remove
accessories. The unit must display a warning that it is working.

Please ensure that the device is properly connected to a grounded outlet.
After repair and maintenance, check the work performed and clean tools.

Do not apply the power to the unit until all workers clean the area. The device must be
checked if there are no problems with the unit before operating the machine.

1.3

Symbols used in this Manual

The following signal word panels, safety symbols and non-safety symbols are used to alert
you to potential personal injury hazards or information of importance. Obey all safety
messages that follow these symbols to avoid possible personal injury or death.

1.3.1 Signal word panels

Signal  word  panels  are  a  method  for  calling  attention  to  a  safety  messages  or  property
damage messages and designate a degree or level of hazard seriousness. It consists of
three  elements:  a  safety  alert  symbol,  a  signal  word  and  a  contrasting  rectangular
background. The  following  signal word panels  are  in  accordance with  ANSI  Z535.4-2007
and ISO 3864 standards.

Indicates a hazardous situation which, if not
avoided, will result in death or serious injury

Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a hazardous situation which, if not
avoided, may result in minor or moderate injury

Indicates a property damage message..

«
...
8
9
10
11
12
...
»

Содержание IL3-15

























































Отзывы:

Нет отзывов

Похожие инструкции для IL3-15

Бренд: I-G3N Страницы: 28

DeltaSphere-3000

Бренд: 3rdTech Страницы: 9

Watchdog Super Elite

Бренд: 4B Страницы: 76

mamaRoo 4M-005-00

Бренд: 4 Moms Страницы: 17

Бренд: Hama Страницы: 10

Бренд: Hama Страницы: 6

Бренд: IFO Страницы: 12

Бренд: Wallenstein Страницы: 48

Бренд: Gared Страницы: 10

Бренд: S+S Regeltechnik Страницы: 16

Бренд: Alpha Arsenal Страницы: 15

Бренд: Suunto Страницы: 5

Бренд: Hama Страницы: 56

Бренд: BGS technic Страницы: 5

Бренд: PCB Piezotronics Страницы: 7

Baby Go Round Twirl

Бренд: Redkite Страницы: 4

Genuine Bindicator VRF-1000 Series

Бренд: Venture Measurement Страницы: 2

Бренд: WABCO Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды