Lab companion IL3-15 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 56

background image

１８

©2016. All Rights Reserved. Jeio Tech Co., Ltd

(5) Please avoided from heat sources and direct sunlight, installed

Temperature and humidity

condition: 18°C ~ 25°C, below 80%RH condition

.

(6) The product should be avoided to use near organic solvents such as Acetone, Methylene Chloride,

etc. also do not use near strong and high frequency noise place.

(7) Do not allow any moisture, organic solvents, dust, or corrosive gases to enter the control box of the

unit.

- Check to make sure that the correct line voltage, phase and capacity correspond to them
specified on the identification plate.

- Make sure your earth connection is duly executed

3.4 Power Supply

Required voltage and current capacity is written on the ID Label of IL3 Series. The user have to check the
required specification of electricity in the ID Label before connecting the power. It is possible to use the
voltage ±10% of written specification in the ID Label.

After checking the required power, Please check your suitable electric outlet. Electric outlet should be

used only for the unit certificated. If you have wrong cord for the unit, please contact to the manufacturer
or reseller.

In case of the power code is short for the installation, the user can use the extension code which
certificated standard in IEC60320.

Please follow below process to connect the power.

Step 1

: Please check the required voltage and current capacity for the product. (ID Label)

Step 2

: Please check the suitable socket and plug at the install location.

Step 3

: Please check if the length of cord is sufficient for installation to choose the suitable install location.

Step 4

: Please check the cord which connected with the unit. Please Put the switch off before the power is

supplied.

Step 5

: Connect the Power cord to the outlet.

Don’t damage the ID Label as whole information of the unit is written on it. Please refer to the ID Label
when the unit has problem, inquiry for consumables for the unit or the service inquiry.

«
...
22
23
24
25
26
...
»

Содержание IL3-15

























































Отзывы:

Нет отзывов

Похожие инструкции для IL3-15

Бренд: Mamiya Страницы: 4

Бренд: 3M Страницы: 26

Бренд: Oki Страницы: 2

Бренд: Panasonic Страницы: 268

Бренд: Nailor Страницы: 6

Бренд: PAC Страницы: 4

Бренд: PAC Страницы: 4

SX-70 SODR-X-TRACTOR

Бренд: Pace Страницы: 2

Бренд: PAC Страницы: 8

Бренд: Labona Страницы: 12

Бренд: TAUBENREUTHER Страницы: 11

Бренд: Yakima Страницы: 15

Бренд: Valcom Страницы: 1

Бренд: Valcom Страницы: 13

Бренд: Valcom Страницы: 3

Бренд: Valcom Страницы: 4

Бренд: SR Suntour Страницы: 10

USB 3.0 Dual Head Docking Station

Бренд: SIIG Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды