L3Harris Narda SignalShark, Руководство пользователя

Страница: 164 / 231

SignalShark User Manual
164
2. Select one of the units (dBm, dBV, dBmV, dBuV) and close the menu by tapping the x
button.
Setting the power level range (Lrange)
Here you can change the settings of the y-axis.
Lrange
1. Tap the Lrange button.
2. Enter the required value and tap the unit button.
The setting is accepted immediately and the input window is closed.
Default Range
Tap to set the range to the default.
Unit
1. Tap the Unit button.
The Unit dropdown menu opens.
2. Select one of the units (dBm, dBV, dBmV, dBuV) and close the menu by tapping the x
button.
Setting the tuner frequency (Ftune)
Here you can do the following:
Setting the tuner frequency (Ftune)
You selected the desired view.
1.
Tap the
Ftune
button.
2. Enter the required value and select a unit.
The settings is accepted immediately and the input window is closed.
Switching on / off the automatic frequency control (AFC)
Tap the AFC button to switch it on or off.
Switching on / off Fcent <–> Ftune
Tap the Fcent <–> Ftune button to switch it on or off
Setting the step width (Fstep)
1. Tap the Fstep button.
2.
Enter the step width and select a unit.
The settings are accepted immediately and the input window is closed.
Selecting a Transmitter Table (Transmitter Tab.)
1. Tap the Transmitter Table button.
2.
Select a table from the dropdown window and confirm with
OK
.
For more information about how to create a transmitter table see Transmitter Tables .