COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 919
Apr. 14/16
Special Tools and Test Equipment
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
(4)
Hardware Requirements for Downloading CVR Data
The FA2100CVR must be removed from the aircraft prior to downloading voice
data. Data Link messages, however, can be downloaded while the recorder is
on the aircraft as this data is accessed in a similar manner to standard flight
data.
There are two methods to download audio and data link information from the
Model FA2100CVR memory:
(a)
Directly download into either a ROC or RAU using the Computer Interface
Control Cable Interface (CICCIfc) utility software in conjunction with the
CICC/2 Interface Cable assembly; p/n: 17TES0070 & 17TES0072.
(b)
Using the Portable Interface (PI) Unit, p/n: 17TES0043 with Mod
−
Dot #6.
This device is used to download the FA2100CVR voice and data link infor-
mation to a PCMCIA memory card which then can be transferred into ei-
ther a ROC or RAU that has the ADLP software installed for playback.
For detailed operational instructions, refer to the Audio Data Link Player Software
Operator’s Manual, P/N: 165E3596
−
00.
D.
CVR Download Cable
Cable can be used to downloaded data while the recorder is on the aircraft us-
ing the Portable Interface Unit. The data in the CVR can not be erase while us-
ing the cable. Refer to the Installation and Operation Manual, Cockpit Voice
Recorder, Model FA2100CVR, Part Number 165E1846-00.33
The document reference is online, please check the correspondence between the online documentation and the printed version.