COMPONENT MAINTENANCE MANUAL
AVIATION RECORDERS
FA2100CVR
Rev. 15 Page 118
Apr. 14/16
Testing & Fault Isolation
23–70–04
Use or disclosure of information on this sheet is subject
to the restrictions on the cover page of this document.
Figure 120. CVR Test, Proceed Message
(w) At the end of the test, save the report by selecting File => Test Report =>
Save Report.
NOTE:
The test report is named with the part number of the Unit Under
Test and the serial number provided in the Information section
of the test. The test report is located in the following default loc-
ation: C:\Program Files\L
−
3Com\CVR Tester\Reports. This file is
in an ASCII text file format.
(x)
If the autotest is successful, clear the fault history log by the pull down
menu, click on Test=>Clear Fault History.
D.
READ
−
OUT CENTER/6 (ROC/6)
−
Autotest Descriptions
The following provides detailed descriptions of the test performed during the autotest
function.
(1)
Power Test
Prompts the user for AC/DC power usage as in the following AC example:
Please remove the front panel cable from the recorder now and click the ”OK” but-
ton.
Please enter the AC power consumption (in amps or watts)
Please enter the AC power consumption (in amps or watts)
Please connect the recorder front panel cable and press the ”OK” button.
Example report message(s):
08:02:13 PASSED Power(AC) (Expected <= 12 watts) Results = (12 watts
−
4
watts) = 8 watts
08:02:23 PASSED Power(DC) (Expected <= 11 watts) Results = (12.375 watts
– 2.2 watts) = 10.175 watts
The document reference is online, please check the correspondence between the online documentation and the printed version.
