Kyocera TASKalfa 3051ci, Руководство по обслуживанию

Страница: 270 / 317

2L6/2N6/2N5/2N4
1-4-269
(11) Offset occurs.
3
Developer unit 1. Check if that the developing
bias is leaked.
Execute AC calibration by U140.
(see page 1-3-99)
2. Check the print image on
paper has a problem at an
interval equivalent to the
circumference of the
developing roller (39mm).
1. If the print image on paper has a problem
at an interval equivalent to the
circumference of the developer roller, clean
the developer unit.
2. Replace the developer unit.
(see page 1-5-36)
Print example Cause of trouble
1. Flawed or dirty drum unit
2. Developing bias leakage.
Defective part Check description Corrective Action
1
Drum unit Check the print image on paper
has a problem at an interval
equivalent to the circumference
of the drum (94mm). If the print image on paper has a problem at an
interval equivalent to the circumference of the
drum, replace the drum unit. (see page 1-5-57)
2
Developer unit
Check if offsets are observed at
an constant interval of 39 mm,
which is equivalent to the cir-
cumference of the developing
roller.
If offsets are observed at an constant interval
of 39 mm, which is equivalent to the
circumference of the developing roller, replace
the developer unit.
(Waste toner is not properly sweeped from the
developing roller.)
(see page 1-5-57)
Defective part Check description Corrective Action