Kyocera ECOSYS FS-C8500DN, Руководство по эксплуатации

Страница: 138 / 240

4-82 Using the Operation Panel
3
Use the arrow keys to set the recovery time.
Press U or V to increase or decrease, respectively, the value at the
blinking cursor.
Use
Y and Z to move the cursor right and left.
4
Press [OK] . The recovery time setting is stored and the Timer Setting
menu reappears.
Sleep Timer (Sleep timer timeout time)
If
Auto Sleep
is set to
On
, you can adjust the length of time the printer
waits before entering Auto Sleep in the absence of data. The printer
reverts to normal operation mode when the printer receives a print job,
[OK] is pressed or one of the exterior covers is opened. The default time
is 15 minutes.
1
In the Timer Setting menu, press U or V to select
Sleep Timer
.
2
Press [OK] . The
Sleep Timer
screen appears.
3
Use the arrow keys to set the sleep time.
Press U or V to increase or decrease, respectively, the value at the
blinking cursor.
Use
Y and Z to move the cursor right and left.
4
Press [OK] . The sleep time setting is stored and the Timer Setting
menu reappears.
PanelReset Timer (Setting the panel reset timer)
When
Auto Panel Reset
is set to
On
, this sets the time until the panel
is automatically reset after the user stops using the panel.
The default setting is
90
seconds.
1
In the Timer Setting menu, press U or V to select
PanelReset
Timer
.
2
Press [OK] . The
PanelReset Timer
screen appears.
3
Use the arrow keys to set the panel reset time.
Press
U
or
V
to increase or decrease, respectively, the value at the
blinking cursor.
Use
Y and Z to move the cursor right and left.
Note Color calibration is automatically executed before the
printer reverts to normal operation mode.
Sleep Timer: a b
(1 - 240)
/15- min.
M
PanelReset Timer:
a b
(5 - 495)
/90- sec.
M