Kuppersbusch KD 9550.0, Руководство по обслуживанию

Страница: 16 / 23

16 Service Manual
For internal use only
5.5 Replacing the touch controls
Should you determine that the control panel circuit board is not functioning, replace it as follows:
1. Open the hood and remove the right-hand panel of
the edge suction device by means of operating the
respective lever.
2. Loosen the screws that fasten the cover of the
control panel to the inner support and remove the
cover.
3. Remove the two screws that fasten the bracket to
the casing and remove the bracket (the control panel
is attached to the bracket).
4. Loosen the screws for releasing the control panel
unit. Open the control panel unit and remove the flat
wire.
control panel unit