Kuppersbusch KD 9550.0, Руководство по обслуживанию

Страница: 20 / 23

20 Service Manual
For internal use only
5.8 Replacing the motor
Proceed as follows to replace the motor unit:
1. Remove the four panels for the edge suctioning.
2. Remove the two self-supporting metal filters.
3. Loosen the four screws with which the main holder is
fastened to the casing and remove the holder.
4. Remove the front filter support sheet by screwing out
the six screws that fasten the casing.
5. Remove the side connections of the motor.
6. Remove the motor unit to be replaced once you have
loosened the two screws which fasten it to the
casing.
7. Instal the new motor unit.
8. Re-assembling is carried out in reverse order.
9. Check the functions.