Kuppersbusch KD 9550.0, Руководство по обслуживанию

Страница: 10 / 23

10 Service Manual
For internal use only
4.1 Controls
Key Designation LED Function
L 0/I Lighting Switching the lighting on and off
T1 0/I Motor on
flashing
First speed setting.
Switches the hood off when the button is pressed
for approx. 2 seconds.
24 h air exchange
Press the button for 5 sec. to switch on. Enables
an extraction rate of 100 m³/h at a sound level of
only 28 dB(A). Can be activated at any speed
setting and when the hood is switched off. Press
the button for 5 sec. again to switch off.
T2 Speed setting on
flashing
Second speed setting
Delay stop (30 minutes)
Press the button for approx. 2 sec. to activate the
delay stop function. Can be used for fully
removing residual odours. Can be activated for
any speed setting; deactivation by means of
briefly pressing the button.
T3 Speed setting on Third speed setting
T4 Speed setting on
flashing
Top speed setting
High-power setting
Suitable when a great deal of cooking steam
develops. Press the button for approx. 2 sec. to
activate. After 10 minutes the fan will
automatically switch back to the previous setting.
Pressing another button once will interrupt the
power setting function.
S1 LED lights up all the
time
flashing
An LED which lights up all the time is an
indication that the metal grease filter is saturated
and that cleaning is necessary. This alarm is
activated after 100 effective hood operating
hours.
A flashing light indicates that the charcoal odour
filter is saturated and needs to be replaced. The
metal filters should also be cleaned. The
saturation display of the charcoal odour filter is
activated after 200 effective hood operating
hours.