Kuppersbusch KD 9550.0, Руководство по обслуживанию

Страница: 19 / 23

Service Manual 19
For internal use only
5.7 Replacing the line filter circuit board
Proceed as follows to replace the line filter board = interference filter:
1. Open the hood and remove the right-hand panel of the edge suction device by means of operating
the respective lever.
2. Remove the left-hand grease filter.
3. Loosen the wing screw and remove the casing with
the line filter circuit board.
4. Loosen the three cover screws and open the cover.
5. Replace the circuit board with a new one with the
same properties.
6. Re-assembling is carried out in reverse order.
7. Check the functions.