Kuppersbusch KD 9550.0, Руководство по обслуживанию

Страница: 11 / 23

Service Manual 11
For internal use only
4.2 Activating the saturation display
For hoods with a recirculating air mode the saturation display is activated on installation or later.
1. Switch off the lighting and the fan motor.
2. Disconnect the hood from the power supply at the intermediate two-pole switch or at the main
switch.
3. Re-establish connection by pressing and holding the T1 button.
4. Let go of the button; all five LEDs light up consistently.
5. Within three seconds press the T1 button until the T1 and T4 LEDs begin to blink as
acknowledgement:
2 blinks of the LEDs – saturation display of the charcoal odour filters is ACTIVATED;
1 blink of the LEDs – saturation display of the charcoal odour filters is DEACTIVATED.
4.3 Resetting the saturation display
1. Switch off the lighting and the fan motor.
2. Press button T3 for at least 3 seconds until the LEDs begin to blink in acknowledgement.