10. - Maintenance and storage
FC244R / FC244R HD
105
KN330CGB_A
Mower conditioner
Disc replacement
Inner disc:
Intermediate discs:
- Place a wooden wedge (2) between two discs to
stop them from moving.
- Remove 2 bolts (1) and their spring washers using
the box spanner supplied with the machine.
- Remove the disc conical cover.
- Remove the 2 other nipple-screws and their spring
washers.
- Remove the disc:
When remounting:
- Position their largest diameters at right angles to
each other.
- Position conical centre of spring washer at the top.
- Tighten screws:
• Torque to 12 daN m (89 lbf ft).
The replacement of the inner disk must be
carried out by your Kuhn authorized dealer.
- Check if there is still a minimum gap X = 1
mm (0.04’’) between the disk lower part and
the cutter bar wear plates.
If this is not the case, fit one (maximum two)
spacer(s) between the disc and the mounting
hub.
+
++++++++
1
2
X
