FC244R / FC244R HD
102
10. - Maintenance and storage
KN330CGB_A
Mower conditioner
Knives
- Inspect systematically all knives before the
machine is operated to:
• ensure the cutting quality.
• ensure safety in use.
• Prevent cutterbar damage risks.
- Replace knives in the following cases:
• Damaged knives. Very rough conditions can
cause knives to crack and become deformed.
• Worn knives.
The length C of a knife must exceed 65 mm (2.6’’).
The width B of a knife, measured at A = 10 mm (0.4’’)
of the disk, must exceed 20 mm (0.79’’).
Elongation of hole due to wear:
- Check that there is still a minimum value L
equalling 9 mm (0.35’’).
A
B
C
L
