5
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: KY-385 PRODUCT CODE: 50844 08/2015
General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use
, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to.
Keep the manual in a safe
place for future reference
, along with the completed warranty card, purchase
receipt and carton. If applicable, pass these instructions on to the next owner of
the appliance.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Electrical safety and cord handling
• Correct voltage:
Make sure your local outlet voltage and circuit frequency
correspond to the voltage indicated on the appliance rating label. If it does not
match, contact the after sales support line and do not use the appliance.
• Do not immerse:
To protect against electric shock, do not immerse the cord,
plug or the whole appliance in water or other liquid. Only clean these parts
with a damp cloth; never wash the outer housing in water. If the appliance is
accidentally immersed, immediately unplug it, dry it and have it checked by
qualified service personnel.
• Moisture:
Ensure your hands are dry before handling the plug or switching on.
• Protect the power cord:
Unwind the cord fully before use. Do not kink, bend,
strain or damage the power cord and protect it from sharp edges and heat. Do
not let the cord hang over the edge of a table or benchtop; do not let it touch
hot surfaces. Do not place anything on top of the cord. Do not wrap it around
the appliance, and never pull the cord to lift up, carry or unplug the appliance.
• No extension cord:
Fully unwind the power supply cord before using the
appliance. Do not use this appliance with an extension cord.
• Check the power cord:
Check the power cord regularly for visible damage. If
it is damaged, it must be replaced by the manufacturer, its authorised service
centres or similar qualified personnel in order to avoid any hazards.
• Do not use when damaged:
Do not pick up or operate an appliance with
a damaged cord or plug, or after the appliance malfunctions or has been
dropped or damaged in any manner. A damaged cord must be replaced by
the manufacturer or a qualified person in order to avoid a hazard. In case of
damage, contact our after sales support line for advice.
