11
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: KY-385 PRODUCT CODE: 50844 08/2015
Assembly
• Place the Multi-Cooker on a flat, dry surface.
• Ensure the appliance is completely dry.
• Place the inner cooking pot into the housing, turning the pot clockwise or
anticlockwise to fully engage the gear into the stirring paddle system.
• Place the stirring paddle onto the spindle inside the inner pot and turn
anticlockwise to secure.
Power connection
• Make sure your household outlet voltage and circuit frequency correspond
to the voltage indicated on the appliance rating label.
• Insert the connector end of the cord into the appliance inlet first, then insert
the electrical plug into the wall outlet and switch on power at the outlet.
Before first use
Before first use we recommend that you thoroughly clean the appliance using
the
Steam
and
Stir
functions. To do this, proceed as follows:
• Fill the inner cooking pot half-full with water.
• Press the ON | MENU button to switch on the appliance, then press the
button again, repeatedly, until the
Steam
program indicator is illuminated.
• Press the STIR button and leave the appliance to heat up.
• After approximately 10 minutes, press the
OFF | KEEP WARM
button to
switch off the appliance.
• Disconnect the appliance as described below.
• Using oven mitts, carefully remove the inner cooking pot from the
appliance and discard the water.
Disconnection
• Switch off power at the wall outlet, then remove the plug from the outlet.
• Unplug the connector from the appliance inlet.
Getting Started (Cont.)
NOTE
The appliance may produce a slight odour when it is first heating up. This
is due to the components being new and can be disregarded safely. It is
entirely harmless and will soon subside. Ensure adequate ventilation
.
