Kubota ZG123S-AU, Руководство оператора

Страница: 35 / 85

OPERATING THE MACHINE 20
STOPPING
To avoid serious injury:
A
Park the machine on level ground.
If necessary to park on an incline,
(1) Stop the machine,
(2) Apply the parking brake, then
(3) Stop the engine.
A
If you stop the engine on an incline without
applying the parking brake, the machine could
move and run away.
A The parking brake lever is for parking use only. If the
parking brake is applied when the motion control
levers are not in "NEUTRAL LOCK" position, the
engine will stop. This feature is to prevent brake and
transmission damage during operation.
1. Move both motion control levers to the "NEUTRAL"
position to stop the machine.
2. Move both motion control levers to "NEUTRAL LOCK"
position.
3. Apply parking brake.
4. Move the throttle lever to the half speed position and
push PTO switch to the "DISENGAGE" (OFF)
position.
5. Lower all implements to the ground.
6. Turn off the engine and remove the key.
A Do not stop the engine when the machine is on an
incline for a long time. The engine oil may go into the
carburetor and the muffler through the valve system.
A
Place the throttle control lever in the half speed
position to help prevent the engine from backfiring
before stopping the engine.
PARKING
TO LOCK:
Place the parking brake lever in the "ENGAGED"
position.
TO UNLOCK:
Place the parking brake lever in the "DISENGAGED"
position.
To avoid serious injury:
Before leaving the operator's position,
A
Apply parking brake.
A Lower all implements to the ground.
A
Shut off the engine.
A
Remove the key.
A
Place the motion control levers in the
"NEUTRAL LOCK" position.
If necessary to park on an incline, be sure to chock the
wheels on the downhill side to prevent accidental rolling of
the machine.
(1) Chocks