Kubota ZG123S-AU Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 85

background image

39

PERIODIC SERVICE

EVERY 50 HOURS

B

Checking Engine Start System

The Engine Start System in your machine are designed to
protect you while operating. Please check these Engine
Start System periodically. It is recommended to check the
Engine Start System before daily operation.

To avoid personal injury:

A

Do not allow anyone near the machine while
testing.

A

If the machine does not pass one of the
following tests, do not operate the machine.
See your local KUBOTA Dealer.

A

Sit on operator's seat for all tests except for
Test 1.

A

Check the following tests before operating the
machine.

Test 1

(OPERATOR NOT ON THE SEAT)

1. Securely set the parking brake.
2. Set the PTO switch to "DISENGAGE" (OFF) position.
3. Set the motion control levers to the "NEUTRAL LOCK"

position.

4. Turn the key switch to "START" position.
5. The engine must not crank.

Test 2

(OPERATOR ON THE SEAT)

1. Do not set the parking brake. (release it from test 1)
2. Set the PTO switch to "DISENGAGE" (OFF) position.
3. Set the motion control levers to the "NEUTRAL LOCK"

position.

4. Turn the key switch to "START" position.
5. The engine must not crank.

Test 3

(OPERATOR ON THE SEAT)

1. Securely set the parking brake.
2. Set the PTO switch to "DISENGAGE" (OFF) position.
3. Grasp the motion control levers and move them

inward from the "NEUTRAL LOCK" position to the
"NEUTRAL" position and then release the levers.

4. Turn the key switch to "START" position.
5. The engine must not crank.

Test 4

(OPERATOR ON THE SEAT)

1. Securely set the parking brake.
2. Set the PTO switch to "ENGAGE" (ON) position.
3. Set the motion control levers to the "NEUTRAL LOCK"

position.

4. Turn the key switch to "START" position.
5. The engine must not crank.

A

If the engine cranks in Test 1 through 4, consult your
local KUBOTA Dealer to have the unit checked before
operation.

Test 5

(OPERATOR ON THE SEAT)

1. Start the engine.
2. Keep the parking brake securely set.
3. Set the PTO switch to "DISENGAGE" (OFF) position.
4. Grasp the motion control levers and move them

inward from "NEUTRAL LOCK" position to
"NEUTRAL" position and then release the levers.

5. The engine must shut off.

A

If the engine remains running in Test 5, consult your
local KUBOTA Dealer to have the unit checked before
operation.

(1) Parking brake lever
(2) Motion control lever
(3) Key switch
(4) PTO switch
(5) Seat switch

«
...
52
53
54
55
56
...
»

Содержание ZG123S-AU






















































































Отзывы:

Нет отзывов

Похожие инструкции для ZG123S-AU

EC Hydro Midsize

Бренд: Ransomes Страницы: 54

Бренд: CanyCom Страницы: 59

2261ADC Articulator

Бренд: Lastec Страницы: 67

TECHline NEXTTECH L X4

Бренд: ZCS Страницы: 42

Бренд: Qualcast Страницы: 29

Бренд: Challenge Страницы: 19

Harmony HRB217TDA

Бренд: Honda Страницы: 76

Бренд: Snapper Страницы: 16

Бренд: Jacobsen Страницы: 76

Бренд: Snapper Страницы: 52

Бренд: MTD Страницы: 32

Бренд: Cramer Страницы: 180

Бренд: Toyama Страницы: 44

Бренд: Toyama Страницы: 52

Бренд: Weed Eater Страницы: 21

Бренд: Kubota Страницы: 162

Бренд: Cub Cadet Страницы: 36

Бренд: Viking Страницы: 371

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды