Kubota ZG123S-AU, Руководство оператора

Страница: 56 / 85

41 PERIODIC SERVICE
6. Reinstall the precleaner over the paper air cleaner
element and install on the base.
Secure with the latch.
7. Close and latch the door.
A
Operating the engine with loose or damaged air
cleaner components could allow unfiltered air into the
engine causing premature wear and failure.
B
Changing Engine Oil (ZG124E, ZG127E)
To avoid personal injury:
A Be sure to stop the engine and remove the key
before changing the oil.
A
Allow engine to cool down sufficiently; oil can
be hot and may cause burns.
1. To change the used oil, unhook the drain hose, direct
the hose down and open the drain valve.
A
The used oil can be drained out more easily if the
engine is warm.
[ZG124E, ZG127E]
2. Fill with the new oil up to the upper level on the
dipstick.
[ZG124E]
[ZG127E]
3. To check the oil level. Remove the dipstick, wipe it
clean, insert it and draw it out again. Check to see that
the oil level is between the two marks.
A
Do not overfill.
(1) Drain hose
(2) Drain valve
(3) Hook
(1) Engine oil port
(2) Oil level dipstick (A) "UPPER LEVEL"
(B) "LOWER LEVEL"
(1) Engine oil port
(2) Oil level dipstick (A) "UPPER LEVEL"
(B) "LOWER LEVEL"