Kubota LA535, Руководство по сборке

Страница: 42 / 51

ASSEMBLY INSTRUCTIONS 38
15.Verify LH/RH stand hooks are properly engaged as
shown below.
B Adjusting the Height of Lifting Stand
1. Raise the boom until the bucket pivot pin is the height
of the boom pivot pin.
2. Dump bucket to max.
3. Move stand lever to the unlocked position as seen in
figure [B].
4. Roll bucket back until roller is in line with the stand
hook center as seen in figure [A].
5. Lower boom until the bucket contacts the ground and
turn engine off.
(1) Stand
(2) Stand hook
(1) Bucket pivot pin
(2) Boom pivot pin (A) Same height
(1) Roller
(2) Stand hook (A) Inline condition
(X) 1 to 3 mm
(A) Unlocked position
(1) Bucket
(2) Stand