Kubota LA535, Руководство по сборке

Страница: 39 / 51

35 ASSEMBLY INSTRUCTIONS
2. Stop the engine, set the parking brake and unfasten
the seat belt.
3. Remove the protective caps from the tractor quick
coupler.
4. Align the quick coupler with the bottom side quick
coupler on tractor and rotate the handle down until the
quick coupler locks. Then make sure the safety lock
button is engaged.
A
Get the quick coupler locked, and move up and down
the lever to make sure the coupler is tightly locked.
5. Make sure the mounting levers of both sides are in the
lock position as shown in the follow figure.
6. Fasten the seat belt and start the engine.
7. Slowly operate the loader control lever to roll the
bucket back and extend the boom cylinders until the
left and right guide bosses of side frames ((1) below)
contact the main frames.
A
Do not attempt to install loader side frames onto the
main frames with boom cylinders fully retracted.
Be sure that 6.0 to 8.0 in. (152 to 203 mm) of boom
cylinder rods are exposed before installing loader.
(1) Protective caps
(1) Handle
(2) Safety lock button (Red) (A) Lower
(B) Clockwise
(1) Mounting lever
(1) Guide boss of side frame
(2) Main frame (A) Contact point