ASSEMBLY INSTRUCTIONS
36
8. Slowly operate the loader control lever to the dump
position to lower the side frames into the main frames
and engage the left and right guide bosses of the side
frames to the saddle brackets of the main frames, as
shown below.
A
Make sure the guide bosses of the side frame are
engaged by the saddle bracket of the main frames.
Otherwise the loader in use may drop off the main
frames, thereby damaging the tractor itself.
9. Make sure that the left and right bosses of the side
frames are engaged by the saddle bracket of the main
frames. Then slowly move the loader control lever to
the dump position until the bucket tilts down the
following degrees to the ground.
A
Make sure the tips of the stands are off the ground.
10. Slowly operate the loader-control-lever to down
position to lift the front wheels slightly with the loader
until the mount hooks are completely mounted on the
main frames as shown in the following figure.
(1) Main frame
(2) Side frame
(3) Boom cylinder
(4) Boom
(A) 6.0 to 8.0 in. (152 to 203 mm)
(1) Guide boss of side frame
(2) Saddle bracket of the main
frame
(A) Engage
(B) To be securely engaged
(1) Bucket
(2) Tip of the stand
(A) Angle between bucket bottom
and ground
Angle between bucket bottom and
ground (A)
20 degrees or so
(1) Mount hook
Содержание LA535
Страница 2: ......
Страница 4: ...CONTENTS TIGHTENING TORQUE OF ADAPTORS ELBOWS AND OTHERS 47 ...
