Kubota LA535, Руководство по сборке

Страница: 13 / 51

9 ASSEMBLY INSTRUCTIONS
A The front guard has its mounting holes in different
positions between CAB models and ROPS models.
Referring to the figure below, select their respective
proper mounting holes.
IMPORTANT:
[When installing the old type mower]
A
When the nuts, which is fixing the bolt of the front
guard, contact the front hanger bracket of the mower,
cut the front hanger bracket as shown in the illustration
below.
A
Before finally tightening all mounting hardware, start
the engine and apply down pressure to the bucket until
the loader raises the front wheels slightly, and make
sure that the mounting pins can be rotated easily.
Tighten all bolts and nuts in this position.
3RD FUNCTION (IF EQUIPPED)
B
Loader Side Section
1. Attach the coupler stay to the boom.
2. Removing right boom cylinder and install 3rd function
hydraulic tubes as shown below.
(A) Proper mounting hole
(1) Front hanger bracket [RCK60-30B]
(A) 30 mm (1.18 in.)
(B) 20 mm (0.78 in.)
[RC72-27B]
(A) 40.5 mm (1.59 in.)
(B) 16.5 mm (0.64 in.)
(1) Coupler stay
(2) M8 x 30 bolt with washers