Kubota LA535, Руководство по сборке

Страница: 32 / 51

ASSEMBLY INSTRUCTIONS 28
2. Connect the 4P coupler hoses to the hydraulic tube as
shown in the figure.
B
4P Coupler (Bottom)
1. Installing coupler stay to main frame as shown below.
A If equipped with the 3rd function and MSL, refer to the
relevant sections. (Page 9 to 10)
B
Foldable Lever
Remove the lever assembly from its base, and replace it
with the foldable lever assembly.
MSL (IF EQUIPPPED)
B
Coupler Stay
Install adapters, couplers and coupler caps into the
coupler stay as shown in the picture.
A If installing Swift-tach or 3rd function, see Page 9.
(1) 4P coupler hoses (A) Hose (White tape)
(B) Hose (Yellow tape)
(C) Hose (Red tape)
(D) Hose (Blue tape)
(X) 90 deg.
(1) 2-M10 x 45 bolts
(2) M10 x 40 bolts
(3) 3-M10 nuts
(4) Coupler stay
(1) Foldable lever assy
(2) 2-M6 x 12 bolts (Original)
(1) 4-Adapters
(45 deg, 9/16 UNF))
(2) 4-Adapters
(Bulkhead, 9/16 UNF-1/4 NPTF)
(3) 4-Couplers (Original from tractor)
(4) Coupler cap (Yellow)
(5) Coupler cap (Red)
(6) Coupler cap (Blue)
(7) Coupler cap (White)
(8) Coupler Stay (A) Wrap around seal tape
(2 to 3 laps)
(B) 90 deg.