Kubota LA535, Руководство по сборке

Страница: 29 / 51

25 ASSEMBLY INSTRUCTIONS
B
Stand Lock Lever
1. Installing the lock lever bracket on the bottom of boom
with carriage bolt (square bolt).
A Making sure the neck bolt location with the assembly
process below.
(i) Sand the bracket with square neck bolt and nut .
(ii) Slide these parts to fit the neck of bolts on key hole.
(iii) Tighten the nuts.
Cross section (top view)
2. Install stand lock rod on the collar bolt and lever
bracket.
A
Key hole on lever rod should be on the slot as below.
(1) 2-Square neck bolts
(2) 2-Flange nuts
(3) Lock lever bracket
(1) 2-Square neck bolts and nuts (A) Slide
(B) Key hole
(1) Stand lock rod
(2) Snap pin
(1) Key hole on stand lock rod
(2) Slot