3 SERVICE WORK ON THE CHASSIS
26
The symbol continues to appear in the display and the
next function appears.
Deactivating a function
–
Press the button .
The symbol disappears in the display and the next
function appears.
3.34
Setting the kilometers or miles
Info
If you change the unit, the value
ODO
is retained and converted accordingly.
The values
TR1
,
TR2
,
A1
,
A2
and
S1
are cleared when the unit of measure is changed.
Condition
The motorcycle is stationary.
400329-01
–
Repeatedly press the button
briefly until
H
appears at the
bottom right of the display.
–
Press the button
for 2
–
3 seconds.
The Setup menu is displayed and the active functions are
shown.
–
Repeatedly press the button
briefly until
Km/h
/
Mph
flashes.
Adjusting the Km/h
–
Press the button .
Adjusting the Mph
–
Press the button .
–
Wait 3 - 5 seconds.
The settings are stored.
Info
If no button is pressed for 10
–
12 seconds, or if an
impulse comes from the wheel speed sensor, the
settings are automatically saved and the setup menu is
closed.
3.35
Setting the clock
Condition
The motorcycle is stationary.
400330-01
–
Repeatedly press the button
briefly until
CLK
appears at the
bottom right of the display.
–
Press the button
for 2
–
3 seconds.
The hour display flashes.
–
Adjust the hour display with the button
and/or button .
–
Wait 3 - 5 seconds.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the
hours by pressing the button
and the button .