KTM F8103S4, Инструкции по установке

Страница: 25 / 36

SERVICE WORK ON THE CHASSIS 3
23
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, filters, fuel, cleaning agents, brake fluid, etc., correctly and in compliance with
the applicable regulations.
Info
Even when there is no load on the 12 V battery, it discharges steadily.
The charging level and the method of charging are very important for the service life of the 12 V battery.
Rapid recharging with a high charging current shortens the service life of the battery.
If the charging current, charging voltage, and charging time are exceeded, the 12 V battery will be
destroyed.
If the 12 V battery is depleted from starting the vehicle repeatedly, the battery must be charged immedi-
ately.
If the 12 V battery is left in a discharged state for an extended period, it will become deeply discharged
and suffer a loss of capacity, destroying the battery.
The 12 V battery is maintenance-free.
Preparatory work
–
Turn the ignition key in the ignition lock to the position
while the engine is idling.
–
Disconnect the negative cable of the 12 V battery. ( p. 21)
H01143-10
Main work
–
Connect the battery charger to the 12 V battery. Adjust the
battery charger.
EU battery charger XCharge
‑
professional (00029095050)
Alternative 1
US battery charger XCharge
‑
professional
(00029095051)
Alternative 2
UK battery charger XCharge
‑
professional
(00029095052)
Alternative 3
CH battery charger XCharge
‑
professional
(00029095053)
Info
Follow the instructions of the charger and the manual.
–
Disconnect the battery charger after charging the 12 V battery.
Guideline
The charging current, charging voltage, and charging time
must not be exceeded.
Recharge the 12 V battery
regularly when the motorcy-
cle is not being used
3 months
Finishing work
–
Connect the negative cable of the 12 V battery. ( p. 22)