SERVICE WORK ON THE CHASSIS 3
25
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider.
» If the boundary between light and dark does not meet
specifications:
–
Adjust the headlight range. (
3.32
Adjusting the headlight range
Preparatory work
–
Check the headlight setting. (
E00975-10
Main work
–
Loosen screw
1
.
–
Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the
lower mark for a motorcycle with rider (instructions on how
to apply the mark: Checking the headlight setting).
Info
A change in weight on the vehicle may require a correc-
tion of the headlight range.
–
Tighten screw
1
.
3.33
Setting the combination instrument
Info
When the vehicle is delivered, only the
SPEED/H
and
SPEED/ODO
display modes are activated.
Condition
The motorcycle is stationary.
400318-01
–
Repeatedly press the button
briefly until
H
appears at the
bottom right of the display.
–
Press the button
for 2
–
3 seconds.
The Setup menu is displayed and the active functions are
shown.
Info
If no button is pressed for 10 - 12 seconds, the
settings are automatically saved.
If no button is pressed for 20 seconds, or if an impulse
comes from the wheel speed sensor, the settings are
automatically saved and the setup menu is closed.
–
Repeatedly press the button
briefly until the desired func-
tion flashes.
The selected function flashes.
Activating the function
–
Press the button .