SERVICE WORK ON THE CHASSIS 3
19
3.22
Locking the seat
E00977-10
–
Fold down the seat and push it down.
The seat engages with an audible click.
–
Check that the seat is correctly locked.
3.23
Installing the license plate holder extension
F01173-01
–
Route turn signal cable to the rear through the license plate
holder extension.
F01174-10
–
Make sure that the bulb is located in the socket.
» If there is no bulb in the socket:
–
Insert the bulb included in the accessory pack in the
socket.
License plate lamp (W5W/socket W2.1x9.5d)
–
Insert the cable with the socket and bulb in the license plate
lamp.
–
Connect the plug-in connector of the left turn signal which is
marked red.
–
Connect the plug-in connector of the right turn signal which is
marked green.
–
Position the license plate holder extension on the license plate
holder.
Info
Make sure the cables and plug-in connections are posi-
tioned correctly.
–
Mount and tighten screws
1
.
