KTM 690 Enduro R 2018, Руководство по ремонту

Страница: 27 / 311

—
Remove upper
sliding bushing
@.
e
Info
Without
using
a
tool, pull
the
stack
slightly
apart by
hand.
—
Take off lower
sliding bushing
@.
—
Take off support
ring
®.
sopioa.i2|
—
Take off seal ring
@.
-—
Take
off lock ring
@.
-
Take off dust boot
©.
-—
Unclamp
the
fork
leg.
Condition
Fork disassembled.
Check the
inner
tube and axle
clamp
for
damage.
»
If there is damage:
—
Change
the inner tube.
GO0865-10
Measure the outside diameter
at
several locations
on
the inner
tube.
Outside diameter of inner 47.975
...
48.005
mm
tube
(1.88878
...
1.88996 in)
»
|f the measured value is less than the specified value:
—
Change
the inner tube.
Saitek
hon
hoe pret
A
li
BEE
200684-10
|
Measure
the run-out
of the inner tube.
|
Run-out of inner tube
<
0.20
mm
(s
0.0079
in)
»
If the measured value is greater than the
specified
value:
—
Change the inner tube.
200685-10
25